Product Details
PESE - Single Layer PES Cartridge
Brand OptiPes
Masterfilter PESE filter cartridges feature a unique single layer, asymmetric hydrophilic polyethersulphone membrane. This membrane is characterized by excellent throughput and higher durability in many applications such as biological pre-filtration and beverage pre-filtration before the final filtration with our PESS, DPES ( PESA,PESF) final filters. Higher flow rates than any other sterilizing grade filter cartridge offers, so Masterfilter PESE filter assures thereby the most economic design of filtration systems.
Features Benefits
- High dirt holding capacity
- Excellent flow rates and longer service life
- 100 % integrity tested
- Low adsorption
- Easy wetting PESE membrane
- Repeatedly integrity testable
Markets
- Pharmaceuticals and Biologicals
- Food and Beverage
- Water
- Chemicals
Technical Specification
Materials of construction
Membrane: Highly asymmetric polyethersulfone
Support layers: Polypropylene
Inner core: Polypropylene
Outer cage: Polypropylene
End caps: Polypropylene
O-rings : Silicone, EPDM, Viton
Operating parameters
Max. differential pressure: 4,0 bar at 21 °C, 2.4 bar at 80 °C
Hot water sanitisation: 80 °C
Filtration area 10” module : 0.58 m²
Applications
- LVP (Large Volume Parenterals)
- SVP (Small Volume Parenterals)
- Pharmaceutical Water Treatment
- Ophthalmics
- API (Active Pharmaceutical Ingridients)
- Brewing
- Wine
- Distilled Spirits
- Bottled Water
- Soft Drinks
- Process Water
- Municipal
- Power Utilities
- Raw Materials Clarification
- Raw Materials Intermediate Polishing
- Final Product Filtration
Filter Properties
- Manufactured under ISO 9001:2015 certified quality management system and cGMP
- Cartridges is marked with unique serial number for identification and traceability
- All components meet the requirements of FDA 21 CFR and EU No. 1935/2004 and EU10/2011
- Comply with FDA 21CFR177-182
- Component materials toxicity meets the USP <88> tests for Class VI-121 °C and ISO 10993 equivalents
- Bacterial Endotoxin testing as per LAL test determined by USP <88> for plastic class IV-121 °C ≤ 0.25 EU/mL
- No fiber releasing; Comply with 21CFR, 210.3(b)(5)(6) and 211.72
- Comply with the relevant requirements of EU 1935/2004 and EU directive 2002/72/EC
